dylatacja AlphaJoint 4010 marki Permaban

AlphaJoint Classic 4040 joints are designed mainly for concrete jointless floors, because they also act as a working break and as a leave-in-lace formwork, but they can be also easily used in cut concrete floors.

Massive cold drawn, square edge steel profile 4010 - 10mm wide and 40mm high, so-called. "4010" protects the edges of jointed floor slabs from crumbling because they are exposed to the impact of passing forklift wheels through the expansion joint openend.

The separating plate widened at the top and bottom, and its perforation, provide additional anchoring in concrete, next to the shear studs, which increases the strength and rigidity of expansion joints, and limits "torsion" of profiles.

TD plate dowels ensure the transfer of loads between floor plates, enabling the horizontal movement of concrete plates, while preventing any vertical movement of these plates relative to each other at the expansion joint. Expansion joints are available with one of three types of load-bearing plate dowels: TD6 6 mm thick, TD8 8 mm thick or TD10 10 mm thick. These dowels are of the same shape and differ only in thickness.

The profiles are connected with peel rivets (frangible fixing system), which break during concrete contraction, allowing expansion joints to open and compensate for this shrinkage. Shear studs ensure steel elements anchoring on each side of the joint. After rivets breaking, in one concrete slab stays: the upper square edge steel bar, sheet steel formwork and plate dowel. In the second concrete slab stays the second upper square edge steel bar and the dowel sleave from which the dowel has already slipped out as far as the slabs have moved apart compensating concrete shrinkage.Even in extreme situations with a 30mm joint opening, TD plate dowels still transfer loads from one plate to another and prevent plate deadlock.

The length of one profile is 3m. Profiles can be cut anywhere.

AlphaJoint Classic 4010 expansion joints are in standard made of natural steel, but you can also order profiles in the version with galvanized square edge upper bars 4010.

As standard, profiles are available in the height range from 250 to 300 mm, higher profiles available on request. Lower profiles, for lower floors with heights 75 to 225mm without an extended and perforated separation plate are called AlphaJoint Classic 4010 >>.