Solvent base concrete impregnate Fortecoat 1626 from Fortemix company

Fortecoat 1425 concrete impregnate can be applied to a fresh, concrete surface immediately after smoothing, as well as to an old, untreated concrete surface. The substrate must be free from dirt and residual water before application.
Due to the incredible penetration capacity of Fortecoat 1425 impregnation at a much greater depth compared to other preparations with similar properties and application - the surface is additionally hardened.

By applying the preparation, the water losses is reduced, thanks to which we obtain better hardening conditions, which ensure greater strength of the concrete plate and its layer surface. At the same time, the pores close, which significantly reduces surface absorption. In this way, the floor system provides a restriction dusting of the floor, increases mechanical and chemical strength and facilitates maintenance.

APLICATION
The preparation can be applied to a fresh concrete surface immediately after it has been seized, as well as to an older, untreated concrete surface. The substrate must be free of dirt and water before application.
Application of Fortecoat 1425 care and hardening impregnant is an application on concrete floors, with surface hardening made with Fortedur dry shake or Fortedur Wet screed layer.
The Fortecoat 1425 care is applied by means of a roller or as a spray. Rolling can only be used if this application does not affect negative the surface quality. In case od wooden formwork, Fortecoat 1425 care must be applied immediately after removal of the formwork.

The area will be divided into parts for which calculated amount of Fortecoat 1425, must be used. Apply the preparation in a thin layer. One layer is usually enough for effective care and elimination of dusting, and gives the floor a gloss. In an excessively dry environment or in a strong draft, immediately after drying, the Fortecoat 1425 waterproofing agent should be additionally covered with a non-woven fabric or PE foil to protect the floor against wind and drying out. Do the same for high temperatures.

PACKING
Fortecoat 1425 is delivered in metal containers with a volume of 20 liters.